-
Apr , 21 2022
Lithium iron phosphate battery refers to a lithium ion battery that uses lithium iron phosphate as a positive electrode material. The battery cathode materials of lithium-ion batteries mainly include lithium cobalt oxide, lithium manganate, lithium nickel oxide, ternary materials, lithium iron phosphate, etc. Among them, lithium cobalt oxide is the cathode material used in the vast majority of lit...
View More
-
Apr , 26 2022
As a new generation of green high-energy rechargeable batteries, lithium-ion batteries have the characteristics of high voltage, high energy density, good cycle performance, small self-discharge, and no memory effect. The main way to improve the specific energy of lithium-ion batteries is to use higher-capacity positive and anode battery materials, thinner separator paper, thinner copper foil and ...
View More
-
May , 13 2022
Pole piece coating generally refers to a process in which a uniformly stirred slurry is evenly coated on the current collector, and the organic solvent in the slurry is dried. The effect of coating has an important impact on battery capacity, internal resistance, cycle life and safety. The reasons for wrinkling during the coating process are as follows: 1. First of all, the installation accuracy o...
View More
-
May , 24 2022
1. Failure: Unwinding correction limit Reason: When the unwinding mechanism is wearing the tape, the tape is not centered in the mode Solution: Adjust the sensor position or center the reel position 2. The upper and lower limits of the discharge floating roller are faulty Reason: The discharge pressure roller is not pressed tightly or the winding tension is not opened, and the potentiometer is abn...
View More
-
Jun , 01 2022
The polymer lithium-ion battery cell adopts aluminum laminated film composite packaging technology. When gas is generated inside the battery cell due to the occurrence of abnormal chemical reactions, the pocket will be charged and the battery core will swell.The performance of the battery cell (Capacity, Cycle life, C-rate, etc.) will fail seriously, making the battery cell unusab...
View More
-
Jun , 17 2022
Advantages and Disadvantages Of Ternary Lithium Battery Many people say that the lithium iron phosphate battery should be fully charged, and the ternary lithium battery should be charged to more than 90%. The reason is that the voltage of the lithium battery will increase after it is fully charged, which will affect the activity of the electrolyte and positive and negative materials, resulting in ...
View More
-
Jun , 28 2022
The lithium-ion battery slurry coating process is a process in which a non-Newtonian fluid contacts, flows, and solidifies a solid substrate.Different from the contact between the solid state, the lithium battery slurry is sprayed from the coating head and coated on the copper foil and aluminum foil, and there will be dynamic changes in the liquid state, including adhesion, wetting, leveling, rebo...
View More
-
Jul , 07 2022
The principle of ultrasonic metal welding is a special method of using the mechanical vibration energy of ultrasonic frequency to connect the same metal or dissimilar metal. When the metal is ultrasonically welded, it neither transmits current to the workpiece nor applies a high temperature heat source to the workpiece, but under static pressure, the frame vibration energy is converted into fricti...
View More
-
Jul , 26 2022
In the production process of lithium batteries, the compaction density has a great influence on the battery performance.Generally speaking, the compaction density is closely related to the specific capacity, efficiency, internal resistance, and cycle performance of the battery.the greater the compaction density, the greater the degree of extrusion between the material particles, the smaller the po...
View More
-
Aug , 09 2022
SEI (Solid Electrolyte Interphase) is also a solid electrolyte interface membrane. When a lithium-ion battery is charged and discharged for the first time, a small amount of polar aprotic solvent in the electrolyte undergoes a reduction reaction after gaining some electrons, and combines with lithium ions to form an interface film with a thickness of about 100-120nm, which is SEI. SEI is usually f...
View More
-
Sep , 02 2022
In the production process of pouch cell battery, there are many factors that can lead to abnormal gas production, which can be divided into several categories: First, the film formation of the cell itself is unstable. In the subsequent cycle process, the SEI film on the surface of the negative electrode may fall off or become loose, and the SEI film(SEI Formation Machine) is reconstructed, accompa...
View More
-
Oct , 11 2022
View More
IPv6 network supported
