Glassy Carbon Electrode GCE Suppliers,Glassy Carbon Electrode GCE Manufacturers

Split Cell With Quartz Window for In-Situ Optical Microscope Analysis of Battery Electrode Interface

AOT-EQ-STC-PQW split test cell is made of PEEK (Poly Ether Ether Ketone) plastic and designed for R&D of rechargeable battery material.

Tags :

Semi-Automatic Battery Stacking Machine for Pouch Cell

This equipment is mainly used for zigzag laminations of square lithium-ion power battery cells.

Tags :

Conductive Carbon Coated Copper Foil For Lithium ion Battery lab Research

Conductive carbon-coated copper foil can replace conventional Al foil as a better anode substrate with improved properties.

Tags :

Carbon Coated Aluminum Foil for Lithium Battery

Carbon-coated aluminum foil is a new type of battery cathode substrate. carbon-coated aluminum foil has good conductivity, low internal resistance and strong mechanical properties.

Tags :

Graphite Coated Copper Foil Electrode Disk for Coin Cells

AOT- GCEDis a Diameter 19 pre-cut graphite coated copper foil for CR20XX coin cell battery and split testing cells.

Tags :

Stacking Machine For Lithium Ion Battery

Lab Manual Pouch Cell Stacking Machine

AOT-DP200 battery stacking machine is a manual laminating machine. It is an ideal tool for stacking multiple layers of positive & negative electrode and separator for pouch cell battery. This is used for lithium battery stacking process, put the cathode, anode electrode and battery separator Z shaped lamination.

Tags :

Battery Electrode Slitter Slitting Machine

Semi-automatic Battery Slitting Machine for Pouch Cell Battery

AOT-MSK-300is a semi-automatic roll slitting machine for preparing electrode of cylinder batteries and pouch cell in laboratories.Eelectric slitting machine can be applied to the precise slitting process of positive and negative plates of lithium ion batteries. Sheet feeding, upper and lower circular knife slitting, electric drive,1

Tags :

Mandrel Bending Tester for Flexible Battery Electrode Testing

AOT-MBT-12-LD is suitable for testing the flexibility of battery electrode sheets or films. It is a manually operated mandrel bending tester with 12 cylinders of various sizes, including 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 25, 32mm diameter.

Tags :

Precision Die Cutter for Pouch Cell electrode Sheet

AOT-MSK-180 is a CE certified precision electrode die-cutting machine that accepts size customization. It is a must-have tool for producing specific shapes of positive and negative electrodes with current collectors in pouch cell production lines. IR sensor built into the front of the machine for safe operation.

Tags :

Zinc Chips Zinc ion Battery Anode Electrode Chips

Zinc metal chips has excellent properties such as high capacity, non-toxicity, relatively low redox potential (-0.76V vs SHE), high safety, and low cost, and has been considered as an ideal anode material for primary and secondary zinc batteries.

Tags :

Automatic Pouch Cell Battery Stacking Machine for Pouch Cell Electrode

This is a large automatic stacking for large pouch cell battery, the maximum size of pouch cell electrodes can be up to L380 mm x W1200 mm x 15mm.

Tags :

Pole Piece Electrode Die Cutting Machine For Pouch Cell Battery

AOT-DC-80 die cutting machine is suitable for die cutting of positive and negative plates of pouch cell batteries. It is pneumatically die cutting and can be used in a glove box.

Tags :