Graphite Coated Anode Electrode Disk Suppliers,Graphite Coated Anode Electrode Disk Manufacturers

Graphite Coated Copper Foil for Lab Battery Anode Electrode Sheets

This graphite coated copper foil is specially use for lithium ion battery anode electrode sheets.

Tags :

Aluminum Foil Coated with LiFePO4 for Battery Cathode Electrode Sheets

The aluminum foil of the cathode electrode is coated with LiFePO4.

Tags :

Aluminum Foil Coated with NCM523 for Lab Battery Cathode Electrode Sheets

The aluminum foil of the cathode electrode is coated with NCM523.

Tags :

High Quality Glassy Carbon Electrode GCE for Lab Battery Experiment

The glassy carbon electrode is abbreviated as GCE, which slowly heats polyacrylonitrile resin or phenolic resin to high temperature (up to 1800C) in an inert atmosphere to form glass-like amorphous carbon, which is suitable for electronic conductor materials for electrodes.

Tags :

Split Cell With Quartz Window for In-Situ Optical Microscope Analysis of Battery Electrode Interface

AOT-EQ-STC-PQW split test cell is made of PEEK (Poly Ether Ether Ketone) plastic and designed for R&D of rechargeable battery material.

Tags :

Semi-Automatic Battery Stacking Machine for Pouch Cell

This equipment is mainly used for zigzag laminations of square lithium-ion power battery cells.

Tags :

Conductive Carbon Coated Copper Foil For Lithium ion Battery lab Research

Conductive carbon-coated copper foil can replace conventional Al foil as a better anode substrate with improved properties.

Tags :

Carbon Coated Aluminum Foil for Lithium Battery

Carbon-coated aluminum foil is a new type of battery cathode substrate. carbon-coated aluminum foil has good conductivity, low internal resistance and strong mechanical properties.

Tags :

Graphite Coated Copper Foil Electrode Disk for Coin Cells

AOT- GCEDis a Diameter 19 pre-cut graphite coated copper foil for CR20XX coin cell battery and split testing cells.

Tags :

Stacking Machine For Lithium Ion Battery

Lab Manual Pouch Cell Stacking Machine

AOT-DP200 battery stacking machine is a manual laminating machine. It is an ideal tool for stacking multiple layers of positive & negative electrode and separator for pouch cell battery. This is used for lithium battery stacking process, put the cathode, anode electrode and battery separator Z shaped lamination.

Tags :

Battery Electrode Slitter Slitting Machine

Semi-automatic Battery Slitting Machine for Pouch Cell Battery

AOT-MSK-300is a semi-automatic roll slitting machine for preparing electrode of cylinder batteries and pouch cell in laboratories.Eelectric slitting machine can be applied to the precise slitting process of positive and negative plates of lithium ion batteries. Sheet feeding, upper and lower circular knife slitting, electric drive,1

Tags :

Lithium Battery Cathode Aluminum Foil Double Side Coated by Li-NCM (523 )

This electrode sheet is based on Aluminum foil coated by Lithium Nickel Manganese Cobalt Oxide in double side and is used as the cathode of Li-Ion battery.

Tags :