Manual Coin Cell Crimper Suppliers,Manual Coin Cell Crimper Manufacturers

Pole Piece Electrode Die Cutting Machine For Pouch Cell Battery

AOT-DC-80 die cutting machine is suitable for die cutting of positive and negative plates of pouch cell batteries. It is pneumatically die cutting and can be used in a glove box.

Tags :

Automatic Pouch Case Forming Machine for Pouch Cell Production

AOT-MSK-120A is an automatic roll-to-roll case/cup forming machine for pouch cell battery production. Polymer casings made from aluminum laminate films can be prepared automatically and at high speed.

Tags :

Vacuum Sealing Machine for Top and Side Vacuum Standing, Sealing, Purging for Pouch Cell Battery

AOT-MSK-115A is a 4 in 1 small heat sealing machine. Mainly have the following functions: side seal; purge; vacuum stand; and vacuum seal.

Tags :

Desktop Constant Temperature Test Chamber and Button Battery Charge and Discharge Tester

AOT-MHW-25-S-16CH it is mainly used in the desktop constant temperature test box for pouch cell battery & button battery laboratory testing. It is more suitable for small-scale research and development and experimentation. It occupies less than half a square meter, freeing up more desktop space, and can observe the experiment situation in the b1

Tags :

Coating Adhesion Tester For Battery Electrode Performance Testing

AOT-QFZ is a coating adhesion tester is used to measure the adhesion ability of various coating films to the surface of the object to be coated. The adhesion performance of the paint film was measured by the circle track method, and the integrity of the paint film within the scratch range of the circle rolling line was used to evaluate the adhesion1

Tags :

NASICON Na3Zr2Si2PO12 Solid State Cell Electrolyte Powder Materials For Sodium Battery

NASICON Na3Zr2Si2PO12 solid state cell electrolyte powder materials for sodium battery,good stability for metallic sodium and liquid electrolyte.

Tags :

Automatic Stacking Machine For Pouch Cell Electrode

This stacking equipment is suitable for assembling the positive and negative plates of lithium-ion battery cells with Z-shaped laminations and isolation membranes.

Tags :

Three-electrode Sealed electrodes Electrolytic Cell for Laboratory

Tags :

Battery Electrode Split Test Cell with Be Window

AOT-EQ-STC-BEW battery can accommodate electrodes and separators of various sizes (diameter 19, 20, and 24mm). It is designed for simple and rapid assembly testing of rechargeable battery electrode materials.

Tags :

Sodium Battery Material Sodium Metal Chips For Coin Cell Raw Material

It is specially designed for button batteries (2032, 2025, 2016) to use composite sodium sheets, with a diameter of 15.6mm, a thickness of 0.4~0.5 mm, and a purity of more than 99.7%.

Tags :