NCMA Cathode Material Suppliers,NCMA Cathode Material Manufacturers

Hot Melt Adhesive Polymer Tape for Heat Sealing Pouch Cell Tabs

Hot Melt Adhesives Polymer Tapes)for Heat Sealing Pouch Cells. This hot melt adhesive/sealant is specially designed to seal labels between aluminum laminated film pouch battery compartments.

Tags :

Grade Sodium Metal Chips For Coin Cell Raw Material

It is specially designed for button batteries (2032, 2025, 2016) to use composite sodium sheets, with a diameter of 15.6mm, a thickness of 0.4~0.5 mm, and a purity of more than 99.7%.

Tags :

Lithium Battery Cathode Aluminum Foil Double Side Coated by Li-NCM (523 )

This electrode sheet is based on Aluminum foil coated by Lithium Nickel Manganese Cobalt Oxide in double side and is used as the cathode of Li-Ion battery.

Tags :

Copper Mesh Foil for Battery Anode Substrate

Lithium battery current collector copper mesh can improve battery energy density.

Tags :

Zinc Chips Zinc ion Battery Anode Electrode Chips

Zinc metal chips has excellent properties such as high capacity, non-toxicity, relatively low redox potential (-0.76V vs SHE), high safety, and low cost, and has been considered as an ideal anode material for primary and secondary zinc batteries.

Tags :

Sodium Battery Materials Electrolyte NaPF6

High-Purity NaPF6 Sodium Battery Electrolyte for Na-ion Battery Raw Material. Sodium ion battery electrolyte, can be customized if there is special need.

Tags :

Polytetrafluoroethylene (PTFE) Condensed Liquid Binder

PTFE Liquid Binder for Li-ion Battery

PTFE adhesive has good high temperature resistance and excellent electrical insulation. It is a fine dispersion stabilized by non-ionic surfactants with a solids content of PTFE up to 60%.

Tags :

LiNI0.5Mn1.5O4 (LNMO) Cathode Powder For Lithium Battery

LiNi0.5Mn1.5O4 (LNMO) cathode material powders are attractive for next-generation 5V Li-ion batteries due to their high discharge plateau, good stability, and cycling performance.

Tags :

Hard Carbon Coated Al Foil for Na-ion Battery Cathode Material

This electrode sheet is based on aluminum foil coated with hard carbon , used as a cathode electrode of a Na-Ion battery.

Tags :

Na3V2(PO4)3 Powder NVP for Sodium-ion Battery Cathode Material

Sodium vanadium phosphate(Na3V2(PO4)3), a cathode material for high tap density sodium-ion batteries, has the advantages of high specific capacity, excellent rate performance and long cycle life.

Tags :

Soft Carbon Powder For Sodium Ion Battery

Sodium Ion Battery Anode Material Soft Carbon Powder

Soft carbon has adjustable layer spacing and good electronic conductivity, and can be used for sodium battery and lithium battery，it is a common sodium battery material.

Tags :

Sodium Cathode Materials Na3V2(PO4)3 NVP Powder for Na-ion Batteries

Sodium vanadium phosphate（NVP）cathode material for sodium-ion batteries, has the advantages of high specific capacity, excellent rate performance and long cycle life.

Tags :