Ring Die For Lab Cutting Tool Suppliers,ring Die For Lab Cutting Tool Manufacturers

Small Vacuum Slurry Mixer Machine for Lab Battery

Compact vacuum mixing machine is designed to produce coating slurry by mixing the small batch of chemicals and compound.

Tags :

Coin Cell Simulator for Swagelok-Type Cells Test Cell

SS316 Battery materials swagelok-type cell for coin cell research

Tags :

Insulation Termination Tape For Lithium-ion Batteries

The strapping tape is primarily used for strapping/fixing the battery core of pouch/cylinder cell as well as good insulation functionality.

Tags :

Conductive Carbon Coated Copper Foil For Lithium ion Battery lab Research

Conductive carbon-coated copper foil can replace conventional Al foil as a better anode substrate with improved properties.

Tags :

Digital Single Channel Pipette Filler For Coin Cell Battery

AOT-200UL is an ergonomic, intuitive electronic pipette made in Germany used for dispensing electrolyte (LiPF6 for Li-ion Battery) to small Coin Cells from battery research and material coating for Spin Coating in most material research lab.

Tags :

Pipetting Devices For Battery Laboratory Research

The pipettes cover volume range of 0.1μl to 10ml

Tags :

Battery Electrolyte Filling Machine Injector For Lab Research

The AOT-BD-50ML is a new generation bottle top burette and dispenser. More accurate and convenient titration.

Tags :

Graphite Coated Copper Foil Electrode Disk for Coin Cells

AOT- GCEDis a Diameter 19 pre-cut graphite coated copper foil for CR20XX coin cell battery and split testing cells.

Tags :

Hot Melt Adhesive Polymer Tape for Heat Sealing Pouch Cell Tabs

Hot Melt Adhesives Polymer Tapes)for Heat Sealing Pouch Cells. This hot melt adhesive/sealant is specially designed to seal labels between aluminum laminated film pouch battery compartments.

Tags :

Battery Charging and Discharging Tester Machine

512 Channel Battery Charging and Discharging TestIing Machine For Battery Analyzer Tester

5V6A Each device can carry out constant current and constant voltage charging and constant current discharge test on 512 batteries meeting the voltage range.

Tags :

Acrylic Glove Box With Pressure Gauge For Battery Research

This equipment is mainly composed of three parts, namely the main box, the transfer room and the side door. There are 2 glove ports. In front of the main vacuum glove box, the inside of the box can be clearly seen. Can also be customized according to customer requirements.

Tags :

High Temperature Muffle Furnaces For Laboratory Research

The furnace consists of high quality alumina fiber brick and MoSi2 heating elements with special design, and furnace temperature is controlled byhigh precision SCR (Silicon Controlled Rectifier) digital controller with accuracy ±1℃ and 30 segments programmable.

Tags :