Silicon Carbon Anode Material Suppliers,Silicon Carbon Anode Material Manufacturers

High Quality Glassy Carbon Electrode GCE for Lab Battery Experiment

The glassy carbon electrode is abbreviated as GCE, which slowly heats polyacrylonitrile resin or phenolic resin to high temperature (up to 1800C) in an inert atmosphere to form glass-like amorphous carbon, which is suitable for electronic conductor materials for electrodes.

Tags :

Conductive Carbon Coated Copper Foil For Lithium ion Battery lab Research

Conductive carbon-coated copper foil can replace conventional Al foil as a better anode substrate with improved properties.

Tags :

Carbon Coated Aluminum Foil for Lithium Battery

Carbon-coated aluminum foil is a new type of battery cathode substrate. carbon-coated aluminum foil has good conductivity, low internal resistance and strong mechanical properties.

Tags :

Graphite Coated Copper Foil Electrode Disk for Coin Cells

AOT- GCEDis a Diameter 19 pre-cut graphite coated copper foil for CR20XX coin cell battery and split testing cells.

Tags :

Hot Melt Adhesive Polymer Tape for Heat Sealing Pouch Cell Tabs

Hot Melt Adhesives Polymer Tapes)for Heat Sealing Pouch Cells. This hot melt adhesive/sealant is specially designed to seal labels between aluminum laminated film pouch battery compartments.

Tags :

Grade Sodium Metal Chips For Coin Cell Raw Material

It is specially designed for button batteries (2032, 2025, 2016) to use composite sodium sheets, with a diameter of 15.6mm, a thickness of 0.4~0.5 mm, and a purity of more than 99.7%.

Tags :

Lithium Battery Cathode Aluminum Foil Double Side Coated by Li-NCM (523 )

This electrode sheet is based on Aluminum foil coated by Lithium Nickel Manganese Cobalt Oxide in double side and is used as the cathode of Li-Ion battery.

Tags :

Copper Mesh Foil for Battery Anode Substrate

Lithium battery current collector copper mesh can improve battery energy density.

Tags :

Zinc Chips Zinc ion Battery Anode Electrode Chips

Zinc metal chips has excellent properties such as high capacity, non-toxicity, relatively low redox potential (-0.76V vs SHE), high safety, and low cost, and has been considered as an ideal anode material for primary and secondary zinc batteries.

Tags :

Sodium Battery Materials Electrolyte NaPF6

High-Purity NaPF6 Sodium Battery Electrolyte for Na-ion Battery Raw Material. Sodium ion battery electrolyte, can be customized if there is special need.

Tags :

Polytetrafluoroethylene (PTFE) Condensed Liquid Binder

PTFE Liquid Binder for Li-ion Battery

PTFE adhesive has good high temperature resistance and excellent electrical insulation. It is a fine dispersion stabilized by non-ionic surfactants with a solids content of PTFE up to 60%.

Tags :

LiNI0.5Mn1.5O4 (LNMO) Cathode Powder For Lithium Battery

LiNi0.5Mn1.5O4 (LNMO) cathode material powders are attractive for next-generation 5V Li-ion batteries due to their high discharge plateau, good stability, and cycling performance.

Tags :