Copper Foil For Anode Substrate Suppliers,Copper Foil For Anode Substrate Manufacturers

Carbon Coated Aluminum Foil for Lithium Battery

Carbon-coated aluminum foil is a new type of battery cathode substrate. carbon-coated aluminum foil has good conductivity, low internal resistance and strong mechanical properties.

Tags :

Battery Electrolyte Filling Machine Injector For Lab Research

The AOT-BD-50ML is a new generation bottle top burette and dispenser. More accurate and convenient titration.

Tags :

Graphite Coated Copper Foil Electrode Disk for Coin Cells

AOT- GCEDis a Diameter 19 pre-cut graphite coated copper foil for CR20XX coin cell battery and split testing cells.

Tags :

Hot Melt Adhesive Polymer Tape for Heat Sealing Pouch Cell Tabs

Hot Melt Adhesives Polymer Tapes)for Heat Sealing Pouch Cells. This hot melt adhesive/sealant is specially designed to seal labels between aluminum laminated film pouch battery compartments.

Tags :

Battery Charging and Discharging Tester Machine

512 Channel Battery Charging and Discharging TestIing Machine For Battery Analyzer Tester

5V6A Each device can carry out constant current and constant voltage charging and constant current discharge test on 512 batteries meeting the voltage range.

Tags :

Acrylic Glove Box With Pressure Gauge For Battery Research

This equipment is mainly composed of three parts, namely the main box, the transfer room and the side door. There are 2 glove ports. In front of the main vacuum glove box, the inside of the box can be clearly seen. Can also be customized according to customer requirements.

Tags :

High Temperature Muffle Furnaces For Laboratory Research

The furnace consists of high quality alumina fiber brick and MoSi2 heating elements with special design, and furnace temperature is controlled byhigh precision SCR (Silicon Controlled Rectifier) digital controller with accuracy ±1℃ and 30 segments programmable.

Tags :

Grade Sodium Metal Chips For Coin Cell Raw Material

It is specially designed for button batteries (2032, 2025, 2016) to use composite sodium sheets, with a diameter of 15.6mm, a thickness of 0.4~0.5 mm, and a purity of more than 99.7%.

Tags :

Uniform Heating Adjustable Tilting Rotary Tube Furnace For Laboratory Research

AOT-T1200 series furnaces are split-able tube furnaces with Fe-Cr-Al alloy heating elements. The precision temperature controller can provide 51 segments heating and cooling steps with +/- 1 ºC accuracy.The furnace is installed with 60mm to 100mm O. D quartz tube with a pair of smart stainless steel vacuum sealing flange and valve/gauge which 1

Tags :

Planetary Vacuum Mixer For Lithium Battery Laboratory Research

AOT-MSK-SFM-2L is a Tri-Shaft Planetary Vacuum Mixer with a 2-liter container and PLC Touch Panel Control. Such a vacuum mixer incorporates the unique tri-shaft stirring design to ensure a gas-bubble free blending of complex materials under vacuum with extreme uniformity.

Tags :

Stacking Machine For Lithium Ion Battery

Lab Manual Pouch Cell Stacking Machine

AOT-DP200 battery stacking machine is a manual laminating machine. It is an ideal tool for stacking multiple layers of positive & negative electrode and separator for pouch cell battery. This is used for lithium battery stacking process, put the cathode, anode electrode and battery separator Z shaped lamination.

Tags :

Battery Electrode Slitter Slitting Machine

Semi-automatic Battery Slitting Machine for Pouch Cell Battery

AOT-MSK-300is a semi-automatic roll slitting machine for preparing electrode of cylinder batteries and pouch cell in laboratories.Eelectric slitting machine can be applied to the precise slitting process of positive and negative plates of lithium ion batteries. Sheet feeding, upper and lower circular knife slitting, electric drive,1

Tags :