Cu Foil Copper Foil Suppliers,Cu Foil Copper Foil Manufacturers

Small Vacuum Slurry Mixer Machine for Lab Battery

Compact vacuum mixing machine is designed to produce coating slurry by mixing the small batch of chemicals and compound.

Tags :

Portable Internal Resistance and Voltage Tester

AOT-BVIR Battery internal resistance tester can be used for measuring the Internal Resistance and Open Circuit. such as Secondary battery, Lead acid battery, Nickle cadmium, Nickle-metal Hydride and Li-ion battery.

Tags :

Conductive Carbon Coated Copper Foil For Lithium ion Battery lab Research

Conductive carbon-coated copper foil can replace conventional Al foil as a better anode substrate with improved properties.

Tags :

Carbon Coated Aluminum Foil for Lithium Battery

Carbon-coated aluminum foil is a new type of battery cathode substrate. carbon-coated aluminum foil has good conductivity, low internal resistance and strong mechanical properties.

Tags :

Graphite Coated Copper Foil Electrode Disk for Coin Cells

AOT- GCEDis a Diameter 19 pre-cut graphite coated copper foil for CR20XX coin cell battery and split testing cells.

Tags :

Battery Forced Internal-Short Circuit Tester

Battery Forced Internal Short Circuit (ISC) Tester

AOT-MSK-ISC is a highly integrated three-in-one battery ISC test system, which can simulate actual tests, and can measure battery voltage, temperature, humidity, and crushing pressure under various environmental conditions.

Tags :

Acrylic Glove Box With Pressure Gauge For Battery Research

This equipment is mainly composed of three parts, namely the main box, the transfer room and the side door. There are 2 glove ports. In front of the main vacuum glove box, the inside of the box can be clearly seen. Can also be customized according to customer requirements.

Tags :

Planetary Vacuum Mixer For Lithium Battery Laboratory Research

AOT-MSK-SFM-2L is a Tri-Shaft Planetary Vacuum Mixer with a 2-liter container and PLC Touch Panel Control. Such a vacuum mixer incorporates the unique tri-shaft stirring design to ensure a gas-bubble free blending of complex materials under vacuum with extreme uniformity.

Tags :

Battery Electrode Slitter Slitting Machine

Semi-automatic Battery Slitting Machine for Pouch Cell Battery

AOT-MSK-300is a semi-automatic roll slitting machine for preparing electrode of cylinder batteries and pouch cell in laboratories.Eelectric slitting machine can be applied to the precise slitting process of positive and negative plates of lithium ion batteries. Sheet feeding, upper and lower circular knife slitting, electric drive,1

Tags :

Vacuum Sealing Machine For Pouch Cell Battery

AOT-YF200 compact vacuum sealer is used for sealing aluminum-laminated case in glove box after injection of electrolyte into pouch Li-ion cell or after formation for final seal (polymer Li-Ion cell). Heatable sealer blade is built into the chamber, automatically sealing the aluminum film pouch case for polymer battery

Tags :

Lithium Battery Cathode Aluminum Foil Double Side Coated by Li-NCM (523 )

This electrode sheet is based on Aluminum foil coated by Lithium Nickel Manganese Cobalt Oxide in double side and is used as the cathode of Li-Ion battery.

Tags :

Precision Die Cutter for Pouch Cell electrode Sheet

AOT-MSK-180 is a CE certified precision electrode die-cutting machine that accepts size customization. It is a must-have tool for producing specific shapes of positive and negative electrodes with current collectors in pouch cell production lines. IR sensor built into the front of the machine for safe operation.

Tags :