Lithium Ion Battery Electrode Coating Suppliers,lithium Ion Battery Electrode Coating Manufacturers

Automatic Pouch Case Forming Machine for Pouch Cell Production

AOT-MSK-120A is an automatic roll-to-roll case/cup forming machine for pouch cell battery production. Polymer casings made from aluminum laminate films can be prepared automatically and at high speed.

Tags :

Hard Carbon Coated Al Foil for Na-ion Battery Cathode Material

This electrode sheet is based on aluminum foil coated with hard carbon , used as a cathode electrode of a Na-Ion battery.

Tags :

Na3V2(PO4)3 Powder NVP for Sodium-ion Battery Cathode Material

Sodium vanadium phosphate(Na3V2(PO4)3), a cathode material for high tap density sodium-ion batteries, has the advantages of high specific capacity, excellent rate performance and long cycle life.

Tags :

Vacuum Sealing Machine for Top and Side Vacuum Standing, Sealing, Purging for Pouch Cell Battery

AOT-MSK-115A is a 4 in 1 small heat sealing machine. Mainly have the following functions: side seal; purge; vacuum stand; and vacuum seal.

Tags :

Spot Welding Machine for Cylindrical Battery Pack Spot Welding

The YDA series uses capacitor energy storage transistors to control the discharge power supply

Tags :

Three Dimensional Vibration Ball Mill for Laboratory Research

AOT-SQM-2 Double-tank high-speed three-dimensional pendulum ball mill for grinding and mixing of various materials.It is an ideal small equipment for laboratory preparation of ultrafine powder and nanomaterials.Dry and wet grinding can be used to mix solids, suspensions and pastes with different particles and materials. Grinding can be carried out 1

Tags :

38µm Battery PP Separator Celgard 2340 For Lithium Battery

Separator Celgard 2340 is composed of PP/PE/PP three-layer diaphragm, which is produced by dry stretching manufacturing process.

Tags :

Desktop Constant Temperature Test Chamber and Button Battery Charge and Discharge Tester

AOT-MHW-25-S-16CH it is mainly used in the desktop constant temperature test box for pouch cell battery & button battery laboratory testing. It is more suitable for small-scale research and development and experimentation. It occupies less than half a square meter, freeing up more desktop space, and can observe the experiment situation in the b1

Tags :

Soft Carbon Powder For Sodium Ion Battery

Sodium Ion Battery Anode Material Soft Carbon Powder

Soft carbon has adjustable layer spacing and good electronic conductivity, and can be used for sodium battery and lithium battery，it is a common sodium battery material.

Tags :

Sonication Vibration Sieving System

AOT-SYU-3 Ultrasonic Inspection and Screening System is a simple, practical and reliable screening system, and it is the most effective solution to current mesh blockage.

Tags :

LATP Li1.3Al0.3Ti1.7P3O12 Soild State Battery Electrolyte Power For Lithium Battery

Tags :

Coating Adhesion Tester For Battery Electrode Performance Testing

AOT-QFZ is a coating adhesion tester is used to measure the adhesion ability of various coating films to the surface of the object to be coated. The adhesion performance of the paint film was measured by the circle track method, and the integrity of the paint film within the scratch range of the circle rolling line was used to evaluate the adhesion1

Tags :