ATE Tester Suppliers,ATE Tester Manufacturers

Hot Melt Adhesive Polymer Tape for Heat Sealing Pouch Cell Tabs

Hot Melt Adhesives Polymer Tapes)for Heat Sealing Pouch Cells. This hot melt adhesive/sealant is specially designed to seal labels between aluminum laminated film pouch battery compartments.

Tags :

Battery Forced Internal-Short Circuit Tester

Battery Forced Internal Short Circuit (ISC) Tester

AOT-MSK-ISC is a highly integrated three-in-one battery ISC test system, which can simulate actual tests, and can measure battery voltage, temperature, humidity, and crushing pressure under various environmental conditions.

Tags :

Battery Charging and Discharging Tester Machine

512 Channel Battery Charging and Discharging TestIing Machine For Battery Analyzer Tester

5V6A Each device can carry out constant current and constant voltage charging and constant current discharge test on 512 batteries meeting the voltage range.

Tags :

Grade Sodium Metal Chips For Coin Cell Raw Material

It is specially designed for button batteries (2032, 2025, 2016) to use composite sodium sheets, with a diameter of 15.6mm, a thickness of 0.4~0.5 mm, and a purity of more than 99.7%.

Tags :

Planetary Vacuum Mixer For Lithium Battery Laboratory Research

AOT-MSK-SFM-2L is a Tri-Shaft Planetary Vacuum Mixer with a 2-liter container and PLC Touch Panel Control. Such a vacuum mixer incorporates the unique tri-shaft stirring design to ensure a gas-bubble free blending of complex materials under vacuum with extreme uniformity.

Tags :

Lithium Battery Cathode Aluminum Foil Double Side Coated by Li-NCM (523 )

This electrode sheet is based on Aluminum foil coated by Lithium Nickel Manganese Cobalt Oxide in double side and is used as the cathode of Li-Ion battery.

Tags :

Mandrel Bending Tester for Flexible Battery Electrode Testing

AOT-MBT-12-LD is suitable for testing the flexibility of battery electrode sheets or films. It is a manually operated mandrel bending tester with 12 cylinders of various sizes, including 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 25, 32mm diameter.

Tags :

Tape Casting Coater with Heated Vacuum Bed And Doctor Blade

Battery Casting Coater Machine with Heated Vacuum Bed And Doctor Blade

MSK-AFA-H200A Is an standard Compact Tape Casting Coater with a vacuum chuck hotplate up to 250ºC and an active carbon filter on the top cover to protect the lab environment.

Tags :

Charging And Discharging Cycle Tester For Lithium Battery

This battery tester is mainly used for charging and discharging cycle test of lithium battery. The test items mainly include battery charging protection voltage, discharge protection voltage, capacity, etc. The equipment has four test steps①Charge, ②Discharge, ③Idle ④ Cycle. Test the battery by editing the corresponding steps and the set process.1

Tags :

Battery Pack Comprehensive Tester Testing Machine

The comprehensive test equipment for finished battery is a fast and accurate device for testing the performance of finished battery. The main test items include: open circuit voltage, AC internal resistance, discharge test, discharge over-current test, short circuit protection test, charging test and charging protection test. The system adopts 32-b1

Tags :

Hi-Speed Spin Coater Machine For Battery Reserach

AOT-VTC-100PA is spin coaster can be used inside the glovebox with Ar gas. This is a tabletop spin coater up to 5(ich) diameter at Max. 10000 rpm. The spin head actuator is a precision DC servo motor with accurate speed and acceleration control.

Tags :

Split-able Pouch Cell with Optional Size for Lithium Battery

AOT-EQ-SPC-Series are splittable pouch cells made of Nylon or Peek, which are designed for testing pouch cells with max electrode dimension of different size. Its detachable design allows you to test the pouch cell behavior as well as structural changes of electrode easily, quickly and cost effectively.

Tags :