Lab Battery Heat Sealing Machine for Pouch Cell Case Top and Side Sealing
1. Battery heat sealing machine is a compact heating sealer for sealing aluminum-laminated films during pouch cell (polymer Li-Ion cell) case preparation.
2. The battery heat sealing machine adopts soft sealing bar, The sealing is copper in bottom and aluminum and Silicone rubber piece on top. So it can be used for both top and side sealing for pouch cell.
3. It can prepare the pouch cell for the injection of electrolyte by sealing the side and top of the pouch cell with tab.
|
Model |
Heat Sealing Machine AOT-TSS-200 for Lithium Polymer Battery |
|
Power Supply |
220V 50Hz ( 110V is available request ) |
|
Sealing Length |
200 mm Max. |
|
Sealing Width |
5 mm (3-10mm) |
|
Sealing Thickness |
0.15 - 0.3 mm |
|
Max. Power |
500W |
|
Sealing Pressure |
0.5 - 0.7 MPa adjustable |
|
Sealing Temperature |
RT-250degree centigrade,adjustable |
|
Heating Timer |
0 - 99 Seconds Adjustable |
|
Warranty |
One Year limited warranty with lifetime support |
|
Product Dimensions |
430mm(L) x 330mm(W) x 480mm(H) |
|
Net Weight |
35kg |
|
Sealing blade type |
Soft sealing blade (Copper sealing blade with aluminum and Silicone rubber piece, good for Al film case sealing and case with tab in between, suitable for both top sealing and side sealing) |
Exhibition
Certificate
![Mg[B(HFIP)4]2](/uploadfile/202401/09/15f1a3930e925703c1b1aaa1833dc2cb_medium.jpg)
IPv6 network supported
