Less layer Graphene Oxide Powder for Lithium Battery Conductive Material
Application: This series of products with a thickness of 1~20nm, chip size is 1~50 um, stably dispersed in various organic solvents in the high-speed stirring or ultrasonic conditions, with high specific surface area and higher thermal conductivity properties, thus can improve the material corrosion and high temperature characteristics, can be used as conductive agent (plastic, coating, rubber), antistatic material, electrode material (chemical power source, sensors, solar cells, fuel cells) and catalyst carrier etc.
Handling and storage:
Operators should be trained, strictly abide by the rules.
Proposed operators wear appropriate protective clothing, wear suitable chemical protective gloves, avoid breathing, avoid direct contact with eyes and skin.
Store in a cool, ventilated and dry place.
Keep the container sealed. Away from fire, heat source.
With the strong oxidation agent separate storage.
Storage area is equipped with the appropriate variety and quantity of fire fighting equipment, emergency treatment equipment and appropriate container materials.
Specification
|
Purity |
>97wt% |
|
Thickness |
1-1.77nm |
|
Diameter |
10-50um |
|
Layer |
1-5 |
|
Specific surface area |
300-450m2/g |
|
Appearance |
Black powder or Brown yellow powder |
|
Warranty |
Within 6month under good storage condition |
Safety precautions: Need to wear proof mask the use of the process, to avoid direct contact with the skin.
![Mg[B(HFIP)4]2](/uploadfile/202401/09/15f1a3930e925703c1b1aaa1833dc2cb_medium.jpg)
IPv6 network supported
