Metal potassium sheet, in advanced battery technology, plays the important role of anode material. Its highly active chemical properties enable potassium ions to quickly migrate in the battery, participate in electrochemical reactions, and achieve efficient energy storage and release. As the core component of new energy storage devices such as potassium ion batteries, potassium tablets show high energy density and potential application value with their unique advantages.
Specifications:
|
Product Name |
Potassium Metal Chips |
|
Thickness |
0.45mm |
|
Diameter |
14mm,15.6mm |
|
Packing |
200pcs/bottle,400pcs/bottle |
|
Packaging Description |
Multilayer composite film or metal shell is used to isolate the influence of external environment. At the same time, the packaging will also be marked with clear warning labels and operational guidelines to ensure safety during transportation, storage and use.
|
|
Instructions for use |
1.The package must be opened inside a glove box with Argon Gas and moisture less than 2%RH. 2.Open the aluminum bag and take out the whole plastic bottle. After taking a certain amount of potassium metal chips and tightly close the bottle cap. 3.Using a tweezer with a flat tip to hold the sodium chip to and then remove the protection membranes with a sharp tweezer. Blue and transparent membranes are removed in sequence. 4.During the battery cell assembling, the aluminum side should be faced to the cell case and potassium metal side should be faced to a separator. |
Exhibition
Cerificate
![Mg[B(HFIP)4]2](/uploadfile/202401/09/15f1a3930e925703c1b1aaa1833dc2cb_medium.jpg)
IPv6 network supported
