Electric Hot Rolling Press with Variable Speed (Ar Gas Compatible)For Lab
AOT-MSK-HRP-01 is a compact hot rolling cylinder press, max. The working temperature is 100℃. It is specially designed for preparing battery electrodes inside and outside the glove box. It is compatible with Ar gas. In lithium-ion battery research, applications such as increasing the density of electrode active materials after coating are very effective.
Effective Cylinder Width
96mm
Roller Size
Dia.96mm x W100mm
Rolling Gap
0~1.2 mm adjustable
Dial Gauge Accuracy
0.01mm
Minimum Thickness
Depending on the electrode's material and thickness, typically:
. A 0.16mm thick electrode coated on copper can be pressed into a minimum thickness of 0.1 mm
. A 0.06mm thick electrode coated on copper can be pressed into a minimum thickness of 0.04 mm
. A 0.33mm thick silver/gold can be pressed into a minimum thickness of 0.03 mm
Heating Temperature
. 100°C maximum for less than one hour
. 80°C continuously
. Recommended Heating Rate: 1.3°C/minute
. Power of Heating Element: 500W
. Temperature Control:
. Precision temperature controller with +/-1°C Accuracy
Rate Voltage
AC 208 - 240V Single phase, 50/60Hz
Motor
. High torque 24VDC motor with reducing gear (1:75)
. 0.8A
. Rated power 40W
. Speed Indicator Display: 0~40
. Actual rolling speed: 0~26 mm/sec (Actual Speed = display value * 0.65)
. Digital controlled with constant output power
Power Consumption
600W max.
Dimensions
520mm(L) x 280mm(W) x 370mm(H)
Warnings
. Do not touch the surface of the rolling part of the machine when the rollers are heated up or running.
. Due to the influence of working environments, the temperature on the roller surface may be different from the display on the controller. You may calibrate the temperature by EQ-TC-calibrator-LD, and refer to the instruction here from time to time to ensure heating temperature accuracy
. Never roll materials with hardness > 50HRC
. Multi-step thickness calendering needed: .
.While calendering the sample sheet, make each calendering decrement of 0.02mm comparing with sheet original thickness.
.Never calendering decrement over 0.02mmcomparing with original sheet thickness each calendering.
.Heating the cylinder beyond 100ºC results in roller deformation and causes inaccurate, thicker-than-usual rolling yield.
. In order to prolong the lifespan of the roller bearings, regular lubrication is recommended.
. Clean roller surface for each rolling and Use acetone to clean and lubricate when not in use to avoid corrosion
. This rolling machine can be used under Ar gas
Product Name
Electric Hot Rolling Press
![Mg[B(HFIP)4]2](/uploadfile/202401/09/15f1a3930e925703c1b1aaa1833dc2cb_medium.jpg)
IPv6 network supported
