This manual rolling press machine is mainly suitable for manual rolling of battery materials in the laboratory with small amount of precious metal materials such as gold, silver, and non-ferrous materials such as copper and aluminum, etc. It is especially suitable for thinning and increasing the density of lithium battery plates. This machine adopts gear transmission to realize the roll pressing, the rolling thickness can be adjusted, and the operation is convenient.
Specification of the Laboratory Small Manual Roller Press Calendering Machine with Dual Rollers for Lithium Battery Electrode:
|
Model |
Vertical type manual roller press machine AOT-SG-100V |
|
Roller diameter |
2~Φ100mm |
|
Roller surface hardness |
>HRC60 |
|
Rolling width |
0~100mm / 0~200mm (can be designed according to your requirement) |
|
Rolling thickness |
0~3mm |
|
Net weight |
50KG |
|
Compliance |
CE Certificate |
|
Warranty |
Two Years limited warranty with lifetime support |
Reference of the Laboratory Small Manual Roller Press Calendering Machine with Digital Gauge
![Mg[B(HFIP)4]2](/uploadfile/202401/09/15f1a3930e925703c1b1aaa1833dc2cb_medium.jpg)
IPv6 network supported
